Renewing Tailpipes; Removing And Installing Starter Catalytic Converter - Audi Q7 2007 Workshop Manual
6-cylinder tdi engine (3.0 ltr. 4-valve common rail), mechanics
Hide thumbs
Also See for Q7 2007:
- Repair manual (414 pages) ,
- Repair manual (345 pages) ,
- Repair manual (81 pages)
Table of Contents
Advertisement
Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Installation position of clamp
–
Install clamp with bolts at the bottom.
1.2
Renewing tailpipes
Procedure
–
Remove tailpipe -arrow-.
–
Fit tailpipe onto rear silencer and align.
–
Check clearance between tailpipes and bumper on both
sides.
•
Dimension -x- (left-side) = dimension -x- (right-side)
1.3
Removing and installing starter catalytic
converter
Removing
Note
All cable ties which are released or cut open when removing
must be fitted in the same position when installing.
–
Unscrew bolts and take off front noise insulation -1- and
rear noise insulation -2-.
204
Repair Group 26 – Exhaust system
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
Advertisement
Table of Contents
