Audi Q7 2007 Workshop Manual page 25

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Initially tighten the support elements on the assembly plat-
form only hand-tight.
–
Adjust the scissor-type assembly platform -VAS 6131- so
that it is horizontal.
•
Take note of spirit level (bubble gauge).
–
Place scissor-type assembly platform under engine/gear-
box assembly.
–
Position the support elements from -VAS 6131/10- or
-VAS 6131/11- at front of subframe, as shown in the illus-
tration.
–
Make sure that threaded spindles are screwed in complete-
ly.
–
Position support elements from -VAS 6131/10- and
-VAS 6131/13- at engine cross member, as shown in the
illustration.
–
Position support elements from -VAS 6131/13- at suspen-
sion struts, as shown in the illustration.
–
Position support elements from -VAS 6131/10- at rear of
subframe, as shown in the illustration.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Audi Q7 2007 !
1 Removing and installing engine
6
19