Audi Q7 2007 Workshop Manual page 145

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
Engine support bracket (supplementary set) -T40093-
♦
Electric drill with plastic brush attachment
♦
Safety goggles
♦
Sealant ⇒ Parts catalogue
♦
Removing
–
Remove poly V-belt
–
Remove poly V-belt tensioner
–
Remove coolant pipe (left-side)
–
Remove air cleaner housing ⇒ Rep. Gr. 23.
–
Remove nuts for engine mountings -arrow- on both sides.
–
Remove front left wheel housing liner ⇒ Rep. Gr. 66.
–
Unscrew nuts and bolts -arrows- for retaining clips for re-
frigerant line.
Note
When the clips have been loosened, the refrigerant lines can
be moved slightly to one side in order to position supports
-10-222 A/19- onto longitudinal members.
–
Set up support bracket -10-222 A- with connecting pieces
-T40091/3- and 2 spindles on wing panel flanges.
•
The spindles face forwards.
–
Attach both spindles to both rear engine lifting eyes.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page 39.
⇒ page
40.
⇒ page
174.
1 Removing and installing parts of lubrication system
Audi Q7 2007 !
6
139