Audi Q7 2007 Workshop Manual page 19

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Remove bolts -arrows- and take off bulkhead plate at rear
left of engine compartment.
–
Remove bolts -arrows- and take off bulkhead plate at rear
right of engine compartment.
–
Remove grommets from drillings above suspension struts.
–
Secure suspension struts (left and right) using spring ten-
sioner -VW 552-.
Note
Securing the suspension struts ensures the drive shafts are
not under load after removing the top suspension strut bolts
at a later stage.
–
Unscrew suspension struts (left and right) from suspension
turret -arrows-.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Audi Q7 2007 !
1 Removing and installing engine
6
13