Removing And Installing Coolant Temperature Sender -G62 - Audi Q7 2007 Workshop Manual
6-cylinder tdi engine (3.0 ltr. 4-valve common rail), mechanics
Hide thumbs
Also See for Q7 2007:
- Repair manual (414 pages) ,
- Repair manual (345 pages) ,
- Repair manual (81 pages)
Table of Contents
Advertisement
Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Install poly V-belt
⇒ page
–
Fill cooling system
Tightening torque
Component
Hose connection with thermostat to engine
1.7
Removing and installing coolant tempera-
ture sender -G62-
Removing
–
Drain off coolant
⇒ page
–
Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
–
Remove air intake hose -arrows-.
–
Unplug electrical connector -1- at coolant temperature
sender -G62-.
–
Detach retaining clip -2- and remove coolant temperature
sender -G62-.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Renew O-ring.
♦
Secure all hose connections with the correct type of hose
♦
clips (same as original equipment) ⇒ Parts catalogue.
–
Fill cooling system
172
Repair Group 19 – Cooling
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
39.
⇒ page
162.
161.
⇒ page
162.
Nm
9
Advertisement
Table of Contents
