Audi Q7 2007 Workshop Manual page 192

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Unscrew bolt -1- on rear of radiator.
–
Press off retaining clips -2- and -3-.
–
Detach ATF cooler -4- from radiator.
Note
ATF hoses remain connected.
–
Unscrew bolts -3- on rear of radiator.
–
Press off retaining clips -2- and -4-.
–
Detach air conditioner condenser -1- from radiator.
Note
Refrigerant lines remain connected.
♦
To prevent damage to the refrigerant lines, ensure that the
♦
pipes and hoses are not stretched, kinked or bent.
–
Lift out radiator from above.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Hose connections and hoses for charge air system must be
♦
free of oil and grease before assembly.
Secure all hose connections with the correct type of hose
♦
clips (same as original equipment) ⇒ Parts catalogue.
–
Install radiator cowl
–
Fill cooling system
Note
The coolant in the entire system must be changed if the radi-
ator is renewed.
Tightening torques
186
Repair Group 19 – Cooling
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
⇒ page 189.
⇒ page 162.