Audi Q7 2007 Workshop Manual page 23

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Unbolt heat shield -A- from steering box.
Caution!
Make sure that front wheels are in straight-ahead position
♦
before removing universal joint from steering box.
Do not alter position of steering wheel and steering box
♦
(locate steering wheel with adhesive tape if necessary).
–
Remove bolt -B- securing universal joint ⇒ Rep. Gr. 48.
–
Separate universal joint from steering box.
–
Place used oil collection and extraction unit -V.A.G 1782-
under engine.
–
Detach hydraulic line -1- going to cooler for power steering
at left of lock carrier.
Note
Disregard -item 2-.
–
Unscrew bolt -arrow- and move coolant pump for contin-
ued circulation -V51- clear to one side.
Note
Observe rules for cleanliness when working on automatic
gearbox ⇒ Rep. Gr. 37.
–
Unscrew bolt -arrow- and detach ATF pipes from ATF tem-
perature regulator.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Audi Q7 2007 !
1 Removing and installing engine
6
17