2.14 Removing And Installing Balance Shaft - Audi Q7 2007 Workshop Manual

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

2.14 Removing and installing balance shaft

Special tools and workshop equipment required
Used oil collection and extraction unit -V.A.G 1782-
♦
Removing
–
Unscrew bolts and take off front noise insulation -1- and
rear noise insulation -2-.
–
Place used oil collection and extraction unit -V.A.G 1782-
under engine.
–
Drain off engine oil.
–
Remove engine ⇒ page
–
Separate engine from gearbox
–
Secure engine to engine stand
leave engine in position on scissor-type assembly platform
-VAS 6131-.
–
Remove sealing flange (front)
–
Remove drive plate
–
Remove timing chain covers
–
Attach adapter -T40049- at rear end of crankshaft using
two old securing bolts for drive plate.
Note
Ignore -arrow-.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
4.
⇒ page 21.
⇒ page 29. Alternatively,
⇒ page 43.
⇒ page 54.
⇒ page 59.
Audi Q7 2007 !
2 Servicing work on timing chain end
6
89