Audi Q7 2007 Workshop Manual page 109

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
5 - 9 Nm
6 - Bracket for oil dipstick
7 - Coolant pipe
8 - Banjo bolt, 12 Nm
9 - 22 Nm
10 - Rail element
" Observe rules for cleanliness
" Do not attempt to bend high-pressure pipes to a different shape
" Tightening high-pressure pipe connections at rail elements
11 - Seals
" Renew
12 - Cylinder head bolt
" Renew
" Note correct sequence when loosening
" Note correct sequence when tightening
13 - Oil retention valve
" Tighten to 25 Nm
14 - Lifting eye
15 - M6: 9 Nm; M8: 22 Nm
16 - Intermediate pipe (left-side)
" Removing and installing
17 - 25 Nm
" Coat with high-temperature lubricant; for high-temperature lubricant refer to ⇒ Parts catalogue
18 - Gasket
" Renew
19 - Cylinder head gasket
⇒ "1.4 Removing and installing cylinder head" on page 112
" Renewing
" Identification ⇒ Fig. on page 104
" Installation position: Part No. towards cylinder head
" If renewed, refill system with fresh coolant
Loosening and tightening central bolt for toothed belt drive
sprocket
–
Use counterhold tool -3036- when loosening and tighten-
ing central bolt -1-.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page 2
⇒ page 213
⇒ Fig. on page 106
⇒ page 114
⇒ page 116
1 Removing and installing cylinder head
Audi Q7 2007 !
6
103