Audi Q7 2007 Workshop Manual page 132

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Place inlet camshaft -2- in camshaft insert tool -T40094-.
•
The locating pin -3- must engage in the slot on the cam-
shaft.
–
Slide exhaust camshaft -1- towards inlet camshaft until
gear teeth engage.
–
Fit retaining frame -1- onto camshafts.
•
All camshaft bearings must be seated on the camshafts.
–
Attach bracket -T40095- to camshafts (align arms of
bracket as required and tighten knurled nuts).
•
Note the different shapes for inlet and exhaust camshaft.
–
Cut off nozzle of tube at front marking (∅ of nozzle approx.
1.5 mm).
126
Repair Group 15 – Cylinder head, valve gear
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259