Audi Q7 2007 Workshop Manual page 189

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Remove bolts -2- and -3-.
–
Detach air pipe from hoses -1- and -4- and remove pipe
downwards.
–
Detach electrical connector -3- at intake manifold flap mo-
tor -V157-.
–
Remove bolts -2- and -4- and move intake manifold flap
motor -V157- clear to the side (with connecting rod in-
stalled).
Note
In order to prevent damage to the intake manifold flap motor
-V157-, the connecting rod -1- is not detached.
–
Unplug electrical connector -1- at coolant temperature
sender -G62-.
–
Remove bolt -2-.
–
Disconnect coolant hoses -arrows- and take out coolant
pipe (rear).
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Renew O-rings.
♦
Hose connections and hoses for charge air system must be
♦
free of oil and grease before assembly.
Secure all hose connections with the correct type of hose
♦
clips (same as original equipment) ⇒ Parts catalogue.
–
Fill cooling system
Tightening torques
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page 162.
1 Removing and installing parts of cooling system
Audi Q7 2007 !
6
183