更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259
Removing
–
Remove sump (bottom section)
–
Detach baffle plate -arrows-.
–
Unscrew bolts -1- and -2-.
–
Hold oil pump drive shaft -3- firmly with long-nose grip pli-
ers -VAS 6226- and push shaft back against spring pres-
sure.
–
Take out oil pump.
Note
Oil pump drive shaft remains in position.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Renew seals and O-rings.
–
Check that the two dowel sleeves are fitted in the oil
pump; install if necessary.
–
Install sump (bottom section)
–
Fill up with engine oil and check oil level
Tightening torques
Component
Oil pump to sump (top section)
Baffle plate to sump (top section)
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page
138.
⇒ page
141.
⇒ page
1 Removing and installing parts of lubrication system
157.
Nm
23
9
Audi Q7 2007 !
6
143