2.13 Balance Shaft - Exploded View Of Components - Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Pull drill bit out of locating hole to release chain tensioner.
–
Press against guide rail of chain tensioner in direction of
-arrow- using a screwdriver, and at the same time tighten
bolts -arrows- securing chain sprocket.
–
Pull diesel injection pump locking pin -3359- out of balance
shaft.
Remaining installation steps are carried out in reverse se-
quence; note the following:
–
Install timing chain covers
Tightening torques
Component
Chain tensioner to cylinder block
Chain sprocket for balance shaft to balance
weight

2.13 Balance shaft - exploded view of components

1 - Sleeve bearing
2 - 60 Nm
" Counterhold with
diesel injection
pump locking pin
-3359- when loos-
ening and tightening
3 - Balance weight (timing
chain end)
4 - 9 Nm
5 - Bearing plate
6 - Balance weight (pulley
end)
7 - 60 Nm
" Counterhold with
diesel injection
pump locking pin
-3359- when loos-
ening and tightening
8 - Sleeve bearing
9 - Balance shaft
" Removing and in-
stalling ⇒ page 89
88
Repair Group 13 – Crankshaft group
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
⇒ page 60.
Nm
9
24