更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259
–
While turning in this direction, lock crankshaft -1- with
locking pin -3242-. Tighten locking pin to 20 Nm.
Caution!
If the crankshaft has been rotated even only slightly beyond
the "TDC" position, turn it back approx. 10
reset it to "TDC" by turning in the normal direction of rota-
tion.
–
Check that it is now possible to lock the camshafts with
locking pins -T40060-.
•
The side pin -arrow- in each locking pin -T40060- must be
in line with the imaginary line between the locking pin and
the centre of the camshaft.
Cylinder bank 1 (right-side):
Cylinder bank 2 (left-side):
Adjusting valve timing
If the locking pin cannot be inserted in one of the camshafts:
–
Loosen all bolts -arrows- on the relevant sprocket approx.
1 turn.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
°
so you can then
Audi Q7 2007 !
2 Servicing work on timing chain end
6
71