Audi Q7 2007 Workshop Manual page 146

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Position further components of support bracket
-10-222 A- as shown in illustration. Position supports
-10-222 A/19- onto flanges of longitudinal members.
–
Push support -T40091/2- with slider support -T40093/5-
into both connecting pieces -T40093/4-.
WARNING!
Secure support -T40091/2- with pins and split pins of con-
necting pieces -T40093/4-.
–
Screw retainer -T10014- in mounting hole for poly V-belt
tensioner.
–
Remove eyelet of lifting tackle -2024 A-.
–
Re-insert pin -1- in centre hole of lifting tackle and secure
with split pin.
–
Hang pin of lifting tackle onto front spindle of support
bracket.
–
Fit extension -2024 A/1- to left side of lifting tackle.
–
Engage lifting tackle -2024 A- in front right lifting eye on
engine and on retainer -T10014-.
WARNING!
The support hooks and retaining pins on the lifting tackle
must be secured with locking pins -arrows-.
–
Lift engine until engine supports are positioned above
studs of engine mountings (take up weight at all spindles
evenly).
–
Position engine and gearbox jack -V.A.G 1383 A- on sub-
frame from below.
140
Repair Group 17 – Lubrication
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259