Audi Q7 2007 Workshop Manual page 185

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Set up support bracket -10-222 A- on wing panel flanges.
•
The spindle is located at the front.
–
Attach spindle of support bracket -10-222 A- to rear right
engine lifting eye.
–
Take up weight of engine using spindle of support bracket.
–
Unbolt earth connection -1- at longitudinal member (right-
side).
–
Unscrew bolts and nuts -1 ... 5- and lift off engine support
(right-side).
–
Remove toothed belt for high-pressure pump
–
Use puller -T10320- to pull off toothed belt drive sprocket.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page
48.
1 Removing and installing parts of cooling system
Audi Q7 2007 !
6
179