Audi Q7 2007 Workshop Manual page 12

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Remove both front wheels.
–
Unscrew bolts and take off front noise insulation -1- and
rear noise insulation -2-.
–
Remove front wheel housing liners (right and left)
⇒ Rep. Gr. 66.
–
Disconnect air intake hoses -1- and -4-.
–
Unscrew bolts -2- and -3- and remove air pipe (bottom).
–
Place drip tray for workshop hoist -VAS 6208- under en-
gine.
–
Disconnect coolant hose -arrow- from coolant pipe (left-
side) and drain off coolant.
–
Unplug electrical connector -2- at radiator outlet coolant
temperature sender -G83-.
–
Disconnect coolant hose (bottom right) -1- at radiator and
drain off coolant.
6
Repair Group 10 – Removing and installing engine
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259