Audi Q7 2007 Workshop Manual page 15

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Remove air intake hose -arrows-.
–
Unplug electrical connector -3-.
–
Remove bolts -1- and -2- and detach throttle valve module
-J338- from intake connecting pipe.
Note
Lay a cloth under the separating point to catch escaping hy-
draulic fluid.
–
Clamp off hydraulic hose for power steering pump using a
hose clamp -3094-.
–
Disconnect hydraulic hose -1- from power steering pump.
Note
Disregard -item 2-.
Note
To prevent damage to the refrigerant lines, ensure that the
pipes and hoses are not stretched, kinked or bent.
–
Unplug electrical connector -2-.
–
Remove retaining clips -1- and -5-.
–
Disconnect refrigerant lines -3- and -4- from air conditioner
compressor.
Note
Seal open pipes and connections at air conditioner compres-
sor with suitable caps (to prevent ingress of dirt and mois-
ture).
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Audi Q7 2007 !
1 Removing and installing engine
6
9