Removing And Installing Turbocharger - Audi Q7 2007 Workshop Manual

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
17 - 9 Nm
18 - Seals
" Renew
19 - Banjo bolt, 15 Nm
20 - Oil supply pipe
" From cylinder block
21 - 9 Nm
22 - O-ring
" Renew
23 - Turbocharger
" Removing and installing
24 - Connecting piece for air intake hose
" From air mass meter -G70- to turbocharger
" Must be free of oil and grease when installing
25 - 9 Nm
26 - Air pipe (right-side)
27 - Bracket for turbocharger
28 - 20 Nm
" Coat with high-temperature lubricant; for high-temperature lubricant refer to ⇒ Parts catalogue
29 - 22 Nm
30 - O-ring
" Renew
31 - Oil return pipe
" To cylinder block
32 - Gasket
" Renew
33 - 30 Nm + 90° ( 1 /
" Bolt strength rating 10.9
" Renew
" Coat with high-temperature lubricant; for high-temperature lubricant refer to ⇒ Parts catalogue
" Note tightening sequence: (left-side)
34 - Intermediate pipe
" Removing and installing: left-side
1.3

Removing and installing turbocharger

Removing
–
Drain off coolant ⇒ page
–
Remove starter catalytic converter
–
Remove coolant pipe (rear right)
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page 195
turn) further
4
⇒ page
161.
⇒ page
⇒ page
⇒ page
213, (right-side)
213, right-side ⇒ page 215
204.
181.
1 Servicing charge air system with turbocharger
Audi Q7 2007 !
⇒ page 215
6
195