Cylinder Head Cover - Exploded View Of Components - Audi Q7 2007 Workshop Manual

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
1.2

Cylinder head cover - exploded view of components

Note
Diagram shows cylinder head cover on cylinder bank 2 (left-side).
1 - 9 Nm
2 - Bracket for intake con-
necting pipe
3 - 9 Nm
4 - O-ring
" Renew
5 - Oil filler neck
" To remove: Lift tab,
turn oil filler neck
anti-clockwise and
take out
6 - Seal
7 - Seal
" Renew if damaged
or leaking
8 - Filler cap
9 - 5 Nm
10 - Fuel return pipe
" Observe rules for
cleanliness
⇒ page 2
11 - High-pressure pipe
" Observe rules for
cleanliness
⇒ page 2
" Mark high-pressure
pipes to ensure they
are re-connected to
the same injectors.
" Do not attempt to
bend high-pressure
pipes to a different
shape
" Tightening high-pressure pipe connections at rail elements
" Tightening high-pressure pipes at injectors
12 - O-ring
" Renew
13 - 9 Nm
" Tighten alternately in stages
14 - Clamping piece
" Must be renewed if injector is renewed
15 - Injector
" Observe rules for cleanliness
" Removing and installing
" When an injector is renewed, also renew the high-pressure pipe and clamping piece at the same
time
16 - O-ring
" Renew
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
⇒ page 2
⇒ "1.3 Removing and installing cylinder head cover" on page 107
⇒ Fig. on page 106
⇒ Fig. on page 106
1 Removing and installing cylinder head
Audi Q7 2007 !
6
105