Audi Q7 2007 Workshop Manual page 48

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Assembly appliance -T40048- with -T40048/4-
♦
Procedure
–
Remove vibration damper
–
Adjust inner part of oil seal extractor -T40019- so that it is
level with the outer part and lock in position with knurled
screw.
–
Lubricate threaded head of oil seal extractor, place it in po-
sition and screw it into oil seal as far as possible (applying
firm pressure).
–
Loosen knurled screw and turn inner part against crank-
shaft until the oil seal is pulled out.
–
Clamp flats of oil seal extractor in vice.
–
Remove oil seal with pliers.
–
Clean running surface and sealing surface.
–
Fit assembly aid -T40048/1- onto assembly sleeve
-T40048/2- and slide oil seal -1- onto assembly sleeve.
–
Take off assembly aid.
–
Fit assembly sleeve -T40048/2- on crankshaft and slide oil
seal -1- into sealing surface in engine.
Note
Leave assembly sleeve -T40048/2- in position on crankshaft
for pressing in seal.
42
Repair Group 13 – Crankshaft group
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
⇒ page 40.