Removing And Installing Temperature Sender Before Particulate Filter -G506 - Audi Q7 2007 Workshop Manual

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
Component
Exhaust gas temperature sender 1 -G235-
to turbocharger
Heat shield to:
•
1) Coat with high-temperature paste; refer to ⇒ Parts
catalogue.
2.2 Removing and installing temperature send-
er before particulate filter -G506-
Removing
–
Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
–
Take electrical connector -4- for temperature sender before
particulate filter -G506- out of bracket.
–
Unplug electrical connector and move wiring towards bot-
tom of vehicle.
Note
Disregard -items 1 ... 3-.
–
Unscrew temperature sender before particulate filter
-G506- -arrow-.
Installing
Install in reverse order.
Tightening torque
Component
Temperature sender before particulate filter
-G506- to particulate filter
•
1) Coat thread with high-temperature paste; refer to
⇒ Parts catalogue.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
turbocharger
cylinder head
2 Removing and installing parts of exhaust gas temperature control
Nm
45 1)
9
9
Nm
45 1)
Audi Q7 2007 !
6
219