Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Oil seal extractor lever -T20143/2-
♦
Procedure
•
Engine/gearbox removed.
–
Remove drive plate
–
Pry out the oil seal using the oil seal extractor lever
-T20143/2-.
–
Modify assembly sleeve -T10122/2- by drilling an 8 mm ∅
hole -arrow 2- for the dowel sleeve.
–
Use hole -arrow 1- in washer as a drilling template.
–
Clean running surface and sealing surface.
–
Fit assembly aid -T10122/1- onto assembly sleeve
-T10122/2- and slide oil seal -A- onto assembly sleeve.
–
Take off assembly aid.
56
Repair Group 13 – Crankshaft group
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259
⇒ page
54.