Audi Q7 2007 Workshop Manual page 85

更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
–
Using a torque wrench and adapter -T40062-, apply a
torque of 30 Nm to camshaft sprocket (right-side) in the di-
rection indicated (-arrow-). Maintain this torque for the fol-
lowing step.
–
Tighten bolts -1- and -2-.
–
Take off adapter -T40062- and pull out locking pin
-T40060-.
–
Tighten remaining bolts for sprocket (right-side).
–
Using a torque wrench and adapter -T40062-, apply a
torque of 15 Nm to camshaft sprocket (left-side) in the di-
rection indicated (-arrow-). Maintain this torque for the fol-
lowing step.
–
Tighten bolts -1- and -2-.
–
Take off adapter -T40062- and pull out locking pin
-T40060-.
–
Tighten remaining bolts for sprocket (left-side).
–
Remove locking pin -3242-.
Checking valve timing
Caution!
Do not rotate crankshaft in opposite direction of engine rota-
tion.
–
Turn crankshaft two rotations in normal direction of rota-
tion -arrow- until the crankshaft is just before "TDC" again.
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Audi Q7 2007 !
2 Servicing work on timing chain end
6
79