Technical Data; Cleaning And Care - Otto Bock SensorHand Speed 8E38-8 Manual

Technical Data

Static current
Operating temperature
Opening width
Proportional speed
Proportional gripping force
Service life of the terminal device
Battery service life
Battery power supply:
757B20/757B21 EnergyPack
757B35=* MyoEnergy Integral
757B15 X-ChangePack

Cleaning and Care

Clean the product with a damp, soft cloth and mild soap (e.g. Ottobock 453H10=1 Derma Clean) when
needed. Ensure that no liquid penetrates into the system components.
Then, dry the prosthesis component with a soft cloth.
Liability
Otto Bock Healthcare Products GmbH, hereafter referred to as manufacturer, assumes liability only if the
user complies with the processing, operating and maintenance instructions as well as the service intervals.
The manufacturer explicitly states that this product may only be used in component combinations that were
authorized by the manufacturer (see instructions for use and catalogs). The manufacturer does not assume
liability for damage caused by component combinations which it did not authorize.
The product may only be opened and repaired by authorized Ottobock technicians.
Trademarks
All product names mentioned in this accompanying document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of the
respective owners. Should trademarks used in this accompanying document fail to be explicitly identified as
such, this does not justify the conclusion that the denotation in question is free of third-party rights.
CE Conformity
This product meets the requirements of the 93/42/EWG guidelines for medical products. This product has
been classified as a class I product according to the classification criteria outlined in appendix IX of the
guidelines. The declaration of conformity was therefore created by Ottobock with sole responsibility accord-
ing to appendix VII of the guidelines.
40 | Ottobock
2 mA
0-70°C
100 mm
15-300 mm/s
0 to approx. 100 N
5 years
2 years
7.2 V
7.4 V
6 V