®
ABB i-bus
KNX
Parameters
7.8.1.2.1.1.2.1
Voltage range for cooling
—
7.8.1.2.1.1.2.1.1
Dependent Parameter
Voltage for maximum cooling
This parameter is used to specify the lower limit for the voltage range for the output of the cooling
control value.
Options:
—
7.8.1.2.1.1.2.1.2
Dependent Parameter
Voltage for minimum cooling
This parameter is used to specify the upper limit for the voltage range for the output of the cooling
control value.
Options:
7.8.1.2.1.1.2.2
Voltage range for heating
—
7.8.1.2.1.1.2.2.1
Dependent Parameter
Voltage for minimum heating
This parameter is used to specify the lower limit for the voltage range for the output of the heating
control value.
Options:
—
7.8.1.2.1.1.2.2.2
Dependent Parameter
Voltage for maximum heating
This parameter is used to specify the upper limit for the voltage range for the output of the heating
control value.
Options:
0.00...02.00...10.00
0.00...05.00...10.00
0.00...07.00...10.00
0.00...10.00
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 260