Setpoint Adjustment Parameter Window - ABB i-bus FCC/S 1 1 Series Product Manual

®
ABB i-bus KNX
Parameters
7.12

Setpoint adjustment parameter window

In actuator mode, this window is deactivated and hidden.
The parameters here allow you to determine how room users can adjust setpoints – either via an
analog room control unit connected directly to the device, or via KNX.
You can also set which datapoint types to use for setpoint and fan speed adjustment.
Fig. 53: Setpoint adjustment parameter window
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 291