ABB i-bus FCC/S 1 1 Series Product Manual page 154

®
ABB i-bus KNX
Parameters
7.4.2.2 FCC/S 1.3.2.1 / 1.5.2.1
The following explanations only apply to
• FCC/S 1.3.2.1
• FCC/S 1.5.2.1
Fig. 35: DESTO001850
7.4.2.2.1 Selection of Controller
The following parameters are visible if the Controller option has been selected in the Device
function parameter.
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 154