Temperature Controller; Temperature Controller Parameter Window - ABB i-bus FCC/S 1 1 Series Product Manual

®
ABB i-bus KNX
Parameters
7.5

Temperature controller

7.5.1

Temperature controller parameter window

This window is deactivated in the actuator mode and is not visible.
General settings for the temperature controller are made in this window. These settings affect
above all the basic load, the sending of control values for the inactive operating mode and the be-
havior on sending the actual room temperature (actual temperature).
Fig. 36: Temperature controller parameter window
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 164