ABB i-bus FCC/S 1 1 Series Product Manual page 140

Knx fan coil controller
Table of Contents

Advertisement

®
ABB i-bus
KNX
Parameters
7.4.1.2.1.2.1
Dependent Parameter
Basic-stage heating
The following description applies in the case that the Actuator device option has been selected in
the Device function parameter.
Options:
This parameter is used to select whether the device is to be used for a heating application.
Deactivated: If this option is selected, the Heating function is deactivated and the Heating
control value group object hidden. All dependent parameters and parameter windows are also
deactivated.
Fan coil unit: Water heating coil: This option should be selected if the device is used to actuate
a heating stage. The dependent parameters and the dependent Heating control value group ob-
ject are enabled.
Dependent parameters:
Type of heating/cooling system
Heating/Cooling changeover
Use 6-way valve (only FCC/S 1.2.x.1 / 1.3.x.1)
Actuate basic-stage heating via
On the selection of the Fan coil unit: electric heater or Fan coil unit: Water heating coil options,
the fan follows the valve control value for this stage if the automatic mode is active.
On the selection of the Free configuration option, this can also be set via a parameter.
7.4.1.2.1.2.2
Dependent Parameter
Basic-stage cooling
The following description applies in the case that the Actuator device option has been selected in
the Device function parameter.
Options:
This parameter is used to select whether the device is to be used for a cooling application.
Deactivated: If this option is selected, the Cooling function is deactivated and the Cooling
control value group object hidden. All dependent parameters and parameter windows are also
deactivated.
Fan coil unit: Water cooling coil: This option should be selected if the device is used to actuate
a heating stage. The dependent parameters and the dependent Cooling control value group ob-
ject are enabled.
Deactivated
Fan coil unit: Water heating coil
Note
Deactivated
Fan coil unit: Water cooling coil
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 140

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents