ABB i-bus FCC/S 1 1 Series Product Manual page 323

®
ABB i-bus KNX
Group objects
No.
5
The group object is enabled if the Manual operation parameter is set to Enabled in the Manual operation pa-
rameter window.
This group object indicates whether manual operation is activated on the device.
6
The group object is enabled if the Manual operation parameter is set to Enabled in the Manual operation pa-
rameter window.
This group object activates or deactivates manual operation.
If the device is in manual operation, manual operation is deactivated again as soon as the value 0 is re-
ceived.
Function
Status Man. operation
Enable/disable manual opera-
tion
Group object name Data Type
General 1 bit
DPT 1.011
General 1 bit
DPT 1.003
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 323
Flag
C, R, T
C, W