ITW Dynatec DYNAMELT D15 Series Technical Documentation Manual page 93

ITW Dynatec
V6 DCL Touch Screen Controller for Dynamelt M & D ASUs
Automatic Ramp Compensation

To go to this screen, press the Automatic Ramp Compensation button on the Extended Pump
Mode Settings Linear Line Speed screen.

The Automatic Ramp Compensation screen allows you to program parameters in order to
compensate the adhesive amount when the speed of the main machine accelerates and
decelerates.
With Linear Pump Control (Line Speed without Pressure PID Loop):
1
2
With Pressure Control PID Loop:
Programming Page 5-17
Revised 1/16
6
5
4
3