ITW Dynatec DYNAMELT D15 Series Technical Documentation Manual page 17

ITW Dynatec
D15/D25/D45 V6 DCL ASU Manual #20-63
Performance
Operating temperature range
Adhesive temperature control accuracy
Standby adhesive temperature range
Hopper ready adhesive temperature deviation
Over-temperature cutoff for hopper
Adhesive viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warm-up time, full hopper
Adhesive delivery rate, open line
Typical adhesive melt rate (depends on adhesive used)
Adhesive pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum recommended pump speed
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuses
DynaControl V6 Controller
Power board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Temperature control zones
Fuses . . . . . . . . . . . . . . . . . . .
Display languages . . . . . . . . . . . . . . . . . . . . .
Operator interface (standard)
Operator interface (option)
Temperature standby
High and low temp alarms
Ready interlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Password protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Priority (sequential) heating
Sensor open alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote communications capable
Seven-day scheduler
Adhesive level sensor
CE approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 on main power board, 10 on each auxiliary power board: 10 Amp
. . . LCD graphic display with rotary-knob controller and simple icons
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 80C (150F) lower than setpoint
(factory set/ field adjustable)
50,000 to 100,000 cps at reduced melt rate
0.38 kg/min (0.83 lb/min)(4.5cc gear pump)
. . . all standard models = 23kg/hr (50 lb/hr)
D25 or D45 w. optional grid = 41kg/hr (90 lb/hr)
D45 w. 2 optional grids = 59kg/hr (130 lb/hr)
up to 68 bar (1000 psi) maximum
90 revolutions per minute (gear pump)
5x20 mm, hose/ head: T6.3AL time delay
5 zones per board, modular construction
5 zones per board, modular construction
English, German, Spanish, French, Japanese, Chinese
color touch screen with expanded features
yes (hopper, hose, head staged heating)
Description Page 2-3
Revised 10/14
38C to 218C (100F to 425F)
 1C ( 1F)
 20C (36F) from setpoint
218C (425F)
1000 to 50,000 centipoise or
approximately 0.5 hour
5-15 triac-output
yes
yes
yes
yes
yes
yes
yes
yes
yes