Lifting The Asu; To Open Hopper Access Cover - ITW Dynatec DYNAMELT D15 Series Technical Documentation Manual

Adhesive supply unit
Table of Contents

Advertisement

Page 3-2
Installation
Revised 10/14

Lifting the ASU

The unit must be lifted by two persons, using proper lifting technique, one per-
son at either end. Securely hold it under its base plate. No belts or hooks should
be used. Never allow anyone to stand on the ASU.
To Open/ Close Front Panel Box Door
1. Slide up the cover on the covered key lock.
2. Insert the front door key (supplied) into the
covered key lock and turn counter-clockwise to
unlock front panel box door. Remove key.
3. Turn the Main On/Off switch clockwise, then
counter-clockwise, and pull front door open.
To close and lock:
1. Close front door.
2. Insert front door key and turn clockwise, then
counter-clockwise.
3. Turn Main On/Off Switch counter-clockwise.
4. Remove front door key and return Main On/Off
key to upright position.

To Open Hopper Access Cover

Hopper Access Cover Side Panels
1. With the key (supplied), unlock the lock on the left or right
hopper access cover.
2. Insert a finger in each of the right or left side cover's two
latches and push down. The side cover will drop off from the
top.
3. Be aware of the grounding wire attached to the cover.
D15/D25/D45 V6 DCL ASU Manual #20-63
WARNING
Front Panel
Box Door
Main On/Off
switch
ITW Dynatec
Panel Box
Side Cover
Hopper Access
Covered
Key Lock
Front Door
Hopper Access
Key
Side Cover
Key
Latch
(1 of 4)
Cover

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DYNAMELT D15 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Dynamelt d25 seriesDynamelt d45 series

Table of Contents

Save PDF