Oct. 1, '83
6A-1. Exposure Glass Removal
1. Take off the left scale (2 short screws).
2. Loosen the two screws that tighten down the
right side of the top cover.
3. Remove the exposure glass.
NOTE: When installing the left scale:
1)
make sure the exposure glass is flush
with the sensor pattern plate.
2)
the left scale must overlap the exposure
g l a s s b y 1 0 ± 0 . 5 m m ( 0 . 3 9 " ±
0 . 0 2 " ) . [ F T 3 0 2 0 ]
6 - 2