Ricoh FT3020 Field Service Manual page 180

PHENOMENON
Blurred or fuzzy image in
the center of copies.
10. Reinstall the drum and make 10 B4 copies.
powder). Then, operate the copier in free run mode for 2 or 3 minutes. (To
help the drum recover its photoconductive characteristics).
11. Make test copies.
cedure.
12. Seal the used cotton pads in a plastic bag and bring it back to the service
center for disposal.
NOTE: If the drum does not respond to cleaning, it has probably crystallized or is
simply worn out.
ACTION
If the problem persists, repeat the drum cleaning pro-
In such case, replace the drum.
(To pick-up any excess cleaning
1 0 - 2 3