6.
Remove the lens housing cover (3 screws).
7.
Disconnect the lens drive motor connector
and disengage it from the rear side plate.
8 .
Lift up the clamps holding the lens drive motor
harness.
9.
R e m o v e t h e l e n s d r i v e m o t o r a s s e m b l y ( 2
screws).
10.
Take off the motor cover (1 screw).
11.
Remove the motor gear (1 allen screw).
12.
Replace the lens drive motor (2 screw).
13.
Reassemble.
6-10-d