July 1, '85
Remove the following parts
5.
(Front Side):
* Toner Collection Bottle
* Charge Corona Unit
* Drum Stay
* Development Unit
* Cleaning Unit
* Erase Lamp Unit
* Drum Flange, Drum, and Drum Guide
6.
Slide the drum shoe with the shoe adapter on
the drum shaft.
7.
Route the shoe lead wire out through the
development unit opening and reset the drum
stay.
8.
Reset the charge corona unit.
9.
Connect the digital multimeter leads – the
positive to the red shoe lead clip, and the
negative and the black shoe lead clip to
ground (See next page).
6-72
[FT3050/FT3060]