Table of Contents
Advertisement
6.
Open the by-pass feed table and the inner
cover.
7.
Remove the toner tank cover (2 screws).
8.
Move the adjusting plate of the paper end
detector up or down by the amount that the
measurement was out of standard in step 5.
9.
Close the inner cover and the by-pass feed
table.
10.
Reload the paper you removed in step 4.
11.
Close the front cover to lift the paper.
12.
Repeat the above steps from 3.
NOTE: Check the operation of paper end detector
with both the cassette and the by-pass
feed table.
Oct. 1, '83
6-33
Advertisement
Chapters
Table of Contents
