3B. Cassette Modification
1. Take off the cassette cover.
2. Move the side fences and the rear fence to the
desired paper size position (1 screw each).
NOTE: Paper size positions are shown on the bot-
tom of the cassette.
3. Apply the proper paper size decals on the
cassette at the positions shown.
4. Insert actuator magnets in the slots on the
front of the cassette.
N O T E : T h e m a g n e t p o s i t i o n t a b l e i s a l s o
embossed on the back side of the cassette.
5. Load paper in the cassette, replace the
cassette cover, and insert the cassette in the
cassette entrance.
6. Make copies.
Check scanner return position
and the copy image.
3-7