Ricoh FT3020 Field Service Manual page 25

July 1, '85
3C. Key Counter Holder Installation
1. Remove the front right cover (2 screws).
2. Open the front cover and remove the inner
cover (4 screws). [FT3020]
Open the front cover, push the slide unit to the
left, and remove the inner cover (5 screws).
[FT3050/FT3060]
3. Remove the cover plate and fixing plate from
the key counter bracket.
4. Hold the fixing plate on the inside of the key
counter bracket and insert the key counter
holder.
5. Align the holes in the fixing plate with the
mounting holes of the key counter holder and
secure the key counter holder.
N O T E : This copier can use three types of
counter. Make sure to use the correct
holes in the fixing plate.
6. Remove the shorting plug from the key
counter connector.
7. Plug in the key counter holder.
8. Reassemble the copier and check key counter
operation.