4. Paper End Detector Adjustment - Ricoh FT3020 Field Service Manual

6D-4. Paper End Detector Adjustment
After adjusting the paper lift detector do this adjust-
ment.
1. Load about 20 mm (0.8") of paper in the
cassette and set it in the copier.
2.
Turn on the main switch with the by-pass feed
table and the front cover closed.
3 . Open the front cover.
4. Remove sheets of paper little by little until the
paper end indicator lights up.
Measure the thickness of the stack of
5.
removed paper.
* If it is 3 ± 1 mm (0.12" ± 0.04"), the following
steps are unnecessary.
6-32