Chapter 4 Maintenance
Male Connector Absorbent for MBIS
When replacing the 2L ink pack, you can prevent dirt from
entering the cradle by periodically (5 to 10 times)
replacing the male connector absorbent (accessory).
• Be sure to wear the supplied safety glasses and
gloves when replacing the male connector absor-
bent.
• When the accessories are finished, please
purchase from your local dealer or our sales office.
(PN:SPA-0625)
1
Push down the lever attached to the
cradle, and remove the 2L eco-case.
2
Remove the male connector absorbent.
3
Insert the new male connector absorbent.
4-24
4
Install the 2L eco-case.
Replacing the Blow down fan filter
Replace the Blow down fan filter (PN:SPC-0774) when it
is dirty.
1
Remove the fan filter cover.
• Push the fan filter cover's tab outward, and pull
the cover out toward you.
Fan filter cover
Tab
2
Remove the Blow down fan filter.
Blow down fan filter