Maintenance Menu; Maintenance Menu List - MIMAKI UJV100-160 Operation Manual

3.2 Maintenance Menu

This menu is used for maintenance actions. It also lets the user perform nozzle recovery if nozzle clogging
persists even after cleaning and nozzle washing.
l Maintenance Menu Screen
LOCAL
TEST PRINT
MENU
CLEANING
l Pressing the [TEST PRINT/CLEANING] key

Maintenance Menu List

Item
Station
Carriage Out
Move To
Platen Right
End
Move To
Maint. Space
Nozzle Wash
Pump tube
cleaning
Custody Wash
Replace Wiper
MENU
SETUP
MAINTENANCE
width:1340mm
MACHINE SETUP
NOZZLE CHECK
INFORMATION
<<
REMOTE
LOCAL
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
*1
Setting
- This moves the carriage to allow station and print head maintenance.
-
- Cleans around the station, including the cap, wiper, and NCU.
"Wiper Cleaning"(P. 88)
"Cap Cleaning"(P. 89)
"NCU Cleaning"(P. 90)
- Cleans around the print head.
"Carriage Underside Cleaning"(P. 91)
"Media Sensor Cleaning"(P. 95)
- Washes the print head nozzle surface with washing liquid to resolve
print defects (e.g., nozzle clogging, deflection).
"Print Head Nozzle Washing"(P. 93)
- Washes the suction pump tube (below the cap).
"Ink Discharge Channel Cleaning"(P. 94)
- Perform this step if the machine will not be used for extended
periods. The function washes nozzles and drainage channels to
maintain the machine in optimal condition.
"When Not in Use for Extended Periods"(P. 98)
- Use this function when replacing the wiper. Replacing the wiper
resets the wiper usage counter.
"Wiper Replacement"(P. 104)
MAINTENANCE
STATION
>
NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK TANK EXCHANGE
>
>
>>
<<
TEST PRINT
>
CLEANING
>
STATION MAINTENANCE
>
RESET REMAINING TANK
>
Details
75
Chapter 3 Settings
>
>
>
>
>>
3