Swing Cutter (B-4205-Qm) - Toshiba TEC B-SX4T Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4.1 SWING CUTTER (B-4205-QM)

Be careful not to injure your fingers when installing the cutter unit.
This optional device is used for cut print, which cannot be used together with either B-8204-QM or B-
9904-H-QM.
When this cutter is used together with an RFID module, be sure to install the RFID module prior to the
cutter.
All the following parts are supplied with the kit. Make sure you have all items shown below.
Cutter Unit (1 pc.)
Cutter Attachment Screw
(2 pcs.)
1) Remove the two black screws to detach the front plate.
NOTE: Retain the two black screws and front plate.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Cutter Blade
Cutter Cover (1 pc.)
Bush (1 pc.)
Black Screws
WARNING!
Cutter Harness (1 pc.)
• Installation manual (1 copy)
• FL-4x6 Screw (1 pc.)
4- 4
EO18-33012B
4.1 SWING CUTTER (B-4205-QM)
Print Head Cleaner (1 pc.)
(P/No.: FMQB0051601)
Front Plate