Toshiba TEC B-SX4T Series Maintenance Manual page 25

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
2) Disassemble the frame into 3 parts.
SMW-3x6
3) Replace the Rotary Cutter Guide Plate B and the Rotary Cutter Guide Plate C with the Rotary Cutter
Frame A and Rotary Cutter Frame B, respectively.
Rotary Cutter Guide Plate C
Rotary Cutter Guide Plate B
4) Assemble the Rotary Cutter Frame A and Rotary Cutter Frame B with an SMW-4x8 screw removed in
step 2).
SMW-4x8
5) Confirming the orientation of the Rotary Cutter PC Board, fix it to the Rotary Cutter Frames A and B
with three SMW-3x6 screws. Then, attach the Rotary Cutter PC Board Cover with an SMW-3x6
screw.
SMW-3x6
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
SMW-4x8
Rotary Cutter PC Board Cover
(To be used later.)
Determine the position by
fitting the two parts here.
4- 8
4.2 ROTARY CUTTER (B-8204-QM)
Rotary Cutter Guide Plate B
Rotary Cutter Guide Plate C
Rotary Cutter Frame B
(P/No.: 7FM01068000)
Rotary Cutter Frame A
(P/No.: 7FM0167000)
Rotary Cutter PC
Board Cover
SMW-3x6
EO18-33012B