Toshiba TEC B-SX4T Series Maintenance Manual page 176

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. Lift the Side Panel (L) and put it aside.
6. Disconnect the Fan Motor Harness from CN19 on the Main PC Board, and then remove the Side Panel
(L).
Side Panel (L)
7. Fully open the Top Cover.
8. Turn the Head Lever to Free position and open the Ribbon Shaft Holder Plate.
Head
Lever
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Fan Motor
4.23 RFID MODULE (B-SX704-RFID-U2-AU-R)
CN19
Main PC Board
4-159
EO18-33012B
(Revision Date May 29, 2008)
Fan Motor Harness
Top Cover
Ribbon Shaft
Holder Plate