Opening/Closing The Top Cover; Removing The Side Panel (L) - Toshiba TEC B-SX4T Series Maintenance Manual

3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT
/MAINTENANCE

3.1 OPENING/CLOSING THE TOP COVER

When opening the top cover, fully open the top cover to the open position.
When closing, softly close it to the close position.

3.2 REMOVING THE SIDE PANEL (L)

1) Remove the four B-4x5 screws from the side panel (L).
2) Open the top cover and remove the three SMW-4x8 screws that secure the side panel (L).
3) Close the top cover.
4) Lift the side panel (L) and put it aside.
5) In case of non RFID-ready printers, release the fan motor harness from the cable clamp,
disconnect it from CN19 on the Main PC board, and then separate the side panel (L).
Side Panel (L)
Fan Motor
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
B-4x5 Screw
B-4x5 Screw
Fan Motor Harness
3.1 OPENING/CLOSING THE TOP COVER
Open Position
Close Position
Main PC Board
3- 3
EO18-33012B
SMW-4x8 Screw
CN19
Cable Clamp