Toshiba TEC B-SX4T Series Maintenance Manual page 173

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
The following parts are required when short-pitch tags (20 mm) are used. Keep them safe when not in use.
• Shield Sheet (1 pc.)
4.23.3 Installation Procedure
4.23.3.1 Preparation for Use of Short-Pitch RFID Tags (20mm)
When short-pitch tags (20 mm) are to be used, the Antenna Ass'y and the Antenna Frame need to be
converted before installing an RFID module in the printer, for proper read/write operation. When short-pitch
tags are not used, skip this section and go to Section 4.23.3.2.
1. Remove the two Tapping Screws to detach the Antenna from the Antenna Ass'y.
Tapping Screw
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
• Antenna Plate L (1 pc.)
4-156
4.23 RFID MODULE (B-SX704-RFID-U2-AU-R)
• Antenna Plate R (1 pc.)
EO18-33012B
(Revision Date May 29, 2008)
• Pan Head Screw
P-3x6 (4 pcs.)
Antenna
Antenna Ass'y