Toshiba TEC B-SX4T Series Maintenance Manual page 90

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
4.12 SWING CUTTER (B-4205-QM-R)
5) Lift the side panel (L) and put it aside.
6) Disconnect the fan motor harness from CN19 on the Main PC board, and then separate the side
panel (L).
Fan Motor Harness
CN19
Side Panel (L)
Fan Motor
Main PC Board
7) Remove the SM-4x8 screw that secures the operation panel ass'y.
SM-4x8 Screw
8) Half open the top cover, otherwise the operation panel ass'y cannot be removed from the printer.
Top Cover
Operation Panel Ass'y
9) Lift the operation panel ass'y to release the hook, and then remove the operation panel ass'y by
moving it forward.
4-73
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es